Publications
- “Modelling Production Techniques for Accurate Gears”
Fish, M. & Palmer, D., BGA Technical Awareness Seminar, 24th November 2010
- “Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error, Noise and Stress in Loaded Spur Gears”
Palmer D. & Fish M. AGMA FTM10, 17-19 October 2010
- “The fundamental mechanism behind the application of tip relief to spur gears”
Palmer D. & Fish M. VDI International Conference On Gears, 4-6 October 2010
- “Optimizing Gear Geometry for Minimum Transmission Error, Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering”
Fraser R., Shaw B, Palmer D. & Fish M. AGMA FTM09, 13-15 September 2009.
- “Optimisation of Gear Performance Through Surface Engineering”
Aylott C., BGA Congress 2008, 20 November 2008.
- “Practical Production of Low Noise Gears”
Penning G., BGA Congress 2008, 20 November 2008.
- “Productivity on Demand”
Jaster M. , Gear Technology (Article), March/April 2008.
- “High Speed Gears for Extreme Applications in Industrial and Marine Fields”
Weiss T. & Hoppe F., Gear Technology, Sep-Oct 2007 p 68-74.
- “The GATES program for low noise gearbox development”
Jaster M. , Gear Technology (Product News), November/December 2007.
- “Design Considerations of Planetary System for Transmission Error Prediction”
D. Palmer J. Pears A. Smith S.Y. Poon M. Lin. ICMT, Chongqing, China. 2006.
- “Tooth Meshing Stiffness Optimisation based on Gear Tooth Form Determination for a Production Process Using Different Tools”
Kissling, U., Raabe M., Fish M., AGMA FTM 2005.
- “Optimisation of gear Quality by introducing Controlled Feed Back in Production”
Beermann S., Fish M., VDI International Conference on Gears, September 2005.
- “Predicting the Contact Conditions for Hypoid Gear Sets by Analysis and Comparison with Test Data”
James B., Douglas M., and Palmer D. SAE Transmission and Driveline Systems Symposium 2002.
- “An Experimental Method to Measure Gear Tooth Stiffness Throughout and Beyond The Path of contact”
Munro R.G, Palmer D & Morrish L. Proc, ImechE, Vol 215 part C, 2001.
- “Ultra-Low Noise Gearbox”
Hofmann D. & Haigh J, Transactions of INEC 2000, Atkins, Hamburg, 14-16 March 2000.
- “Modelling Contact Characteristics in Worm Gear Systems”
Fish M., Munro R.G., BGA Congress 1999, Drives & Controls Conference, Telford, England.
- “Isolating and Quantifying Tooth Deformation in Worm Gear Systems Operating Under a Torque Load”
Fish M., Munro R.G., Lamdamap Conference 1999, University of Northumbria, Newcastle, England.
- “The Effects of Profile Relief on Narrow Face Width Parallel Axis Gears”
Palmer D. Phd Dissertation, Huddersfield University UK, 1999.
- “Gear Transmission Error outside the Normal Path of Contact Due to Corner and Top Contact”
Munro R.G., Morrish L. & Palmer D. Proc, IMechE, Vol 213 part C, 1999.
- “Soft Gearing – PC help in gear development”
Industrial Technology, October 1999.
- “Worm Gear Predictions by Computer”
Design Engineering, September 1999.
- “Worm Gear Predictions by Computer”
Gear Technology, July / August 1999.
- “Transmission Errors in Precision Worm Gear Drives”
Fish M., University of Huddersfield 1998, Huddersfield, England.
- “Kinematic Errors in Precision Worm Gears”
Fish M., Munro R.G., Lamdamap Conference 1997, University of Huddersfield, England.
- “Analysis of Marking Patterns and Transmission Errors in Worm Gears”
Fish M., Munro R.G., BGA Congress 1995, Sheffield, England.
- “Measurement of Transmission Error, Vibration & Noise in Spur Gears.”
Palmer D. & Munro R.G. British Gear Association Technical Congress. 2 November 1995.
